上海時濱電子科技有限公司優勢代理美國Edgetech冷鏡露點儀、Edgetech冷鏡濕度計、Edgetech在線冷鏡露點儀、Edgetech臺式冷鏡露點儀、Edgetech冷鏡露點濕度計產品。歡迎致電咨詢：13402037392（同微信）郭先生，QQ：2932676006
EdgeTech RH CAL 便攜式相對濕度校準儀
便攜式，NIST，冷鏡校準室用于相對濕度，溫度和露點
Unlike other comparative systems RH CAL is entirely self-sufficient. It does not need compressed air or a water connection to operate, which allows this system to be truly portable.
RH CAL is a microprocessor based, programmable humidity calibration system that is at home in the metrology lab or out in the field performing on site NIST traceable humidity calibrations. The system offers the highest accuracy available for both relative humidity and ambient temperature.
With RH CAL, temperature and relative humidity are controlled independently; therefore, you are not limited to performing calibrations at the surrounding ambient temperature, which may not be appropriate for your unique calibration protocol. Using EdgeTech’s Optical Chilled Mirror (OCM) primary measurement technique for traceability and feedback control, RH CAL is a standalone, portable humidity calibration system.
Contributing to RH CAL’s ease of use are features such as maintenance reducing Automatic Balance Cycle (ABC), an integral ambient temperature probe and D2 chilled mirror sensor which are located in the sample chamber providing not only superior accuracy but the fastest response.
EdgeTech field proven Optical Chilled Mirror (OCM) technology
Completely self-sufficient and portable humidity calibration system
Highest accuracy available for both RH and temperature (AT):
RH Accuracy: ± 0.5%
RH Range: 5% to 95%
AT Accuracy: ± 0.2°C
AT Range: 10°C to 50°C
Temperature and RH controlled independently
Automatic correction for mirror contaminants
Certified measurements against NIST traceable standards
Standard features, where others charge extra
EdgeTech 1500 便攜式露點監視器
Self-contained monitoring system includes everything needed for fast accurate dew point measurements
Finally, a portable Dew Point hygrometer that integrates the accuracy and reliability of the EdgeTech chilled mirror, with the battery life and ruggedness required for field use.
Introducing the Model 1500 portable chilled mirror hygrometer. This device incorporates all of the standard features that you’ve become accustomed to from EdgeTech, such as drift-free NIST traceable accuracy, low maintenance, high durability and ease of use, in a system that is ideally suited for the demands of field use. Whether you use the Model 1500 as a field transfer standard, or to spot check your process air dryness or Endo gas dew point, you’ll find this system trouble-free to operate.
The Model 1500 is a self contained system; not only is there no field assembly required, there’s no need to carry around a myriad of individual components such as control boxes, sensors, cables, pumps, and power cords. Simply attach the sample line, adjust the flow (with the integral flow meter) and turn on the power. Within minutes you’ll be collecting field dew point data with the same chilled mirror accuracy of a lab standard hygrometer. And with a nominal battery life of 12 hours, you will be able to collect for the entire shift or spot check your processes for several days.
Primary measurement technique
NIST Traceable
Rechargeable Batteries
Easily transportable in hard protective case
Wide measurement range(-75 to 75°C)
Microprocessor controlled
Self balancing
Chilled mirror sensor selection required
EdgeTech HTM 系列露點監視器
便攜式，電池供電的露點顯示器非常適合壓縮空氣或機應用
The HTM Series is a series of portable, battery powered dew point monitors that provide a quick response for dew points to –60°C. The unit is factory set to display humidity, temperature and dew point. Other selectable parameters are accessible via the RS232 connections.
The sensor probe has a wide temperature range and is resistant to most chemicals. For applications where drawing a sample is not feasible,
the Model HTM sensor is flexible enough to be removed from its sample chamber and be remotely mounted. Field replaceable sensors are available with an interchangeability of ±1%. The HTM is ideally suited for compressed air and dryer applications. The HTM dew point monitor is calibrated and adjusted to a traceable reference standard and comes with a NIST traceable calibration certificate.
Battery powered
Portable, lightweight
Fast responding
Dew points to -60°C
Plug and play
EdgeTech DewMaster 冷鏡式濕度計
測量露點，絕對壓力，ppmv的等焓濕參數
EdgeTech field-proven chilled mirror technology.
One, two or three stage sensors available - integral or remote from controller.
NIST traceable calibration certificate.
Depression range choice of either 45, 65 or 95°C . (one, two or three-stage cooling)
Automatic Balance Control (ABC)
Automatically corrects for most mirror contaminants.
Automatically restandardizes the instrument.
You choose time and interval of restandardization,for best convenience.
Increase the length of unattended operation.
Dual alarm capability
User programmable.
Can be set for latching or auto-reset mode.
Form C for greater versatility.
Serial and analog outputs.
RS232 communication with terminal, printer, or computer
Remote programming.
Data output such as dew point and alarm status.
0-5 VDC, 4-20 mA, 0-10 VDC, or 0-20mA
User scalable to drive peripheral devices.
Available simultaneously, one output per measurement parameter.
Scalable throughout the entire operating range of psychrometric variables.
Program via front panel or remote serial port.
Pressure transducer input for psychrometric variable.
3 parameter measurement - dew point, temperature, pressure
3 line dislpay and analog outputs
Table top/rack mount
Nema 4 housing option
EdgeTech DewTrak II 露點和濕度變送器
墻，風管，管道或遠程安裝，±0.2°C的精度和±0.05°C重復性
The EdgeTech Model DewTrak II dew point / humidity transmitter is an optical chill mirror hygrometer designed to continuously measure the moisture content in gases. The instrument is powered by 24Vdc.
The DewTrak II uses the chilled mirror dew point temperature condensation principle to determine the water vapor concentration in gas mixtures, and a platinum resistance thermometer to accurately measure that temperature. Outputs include 4 to 20mA, 0 to 5 Vdc, or 0-10Vdc and an RS232 serial port as well as electrically isolated relay contacts.
4 wire PRT measurement for Dew Point and AT (optional)
±0.2°C Accuracy for both Dew Point and Temperature
Long term stability and repeatability
RS232, bi-directional, Serial Output
Electronics housed in IP65 enclosure (Wall Mount)
Aluminum housing for other configurations
2 analog outputs (4-20mA / 0-5Vdc to 0-10Vdc selectable)
EdgeTech 137 飛機濕度計/Vigilant Aircraft Hygrometer
The EdgeTech Model 137 Vigilant Aircraft Hygrometer is a rugged, shock mounted military qualified instrument used for the primary measurement of dew point in flight or in installations with existing flow, such as wind tunnels.
It features a miniature remote dew point sensor employing a platinum resistance thermometer, and has 15 feet of interconnecting cable to the control unit. Precision calibration units for the linear analog outputs are included.
The specially designed dew point sensor is mounted through the skin of the aircraft and is mounted to either the left or right side of the aircraft.
The dew point is detected by using chill mirror technology assuring precision accuracy, repeatability and reliability.
Measure dew points in flight
Rugged shock-mounted, military qualified
Configuration for left or right hand mounting is available
110Vac power
Chilled mirror sensor selection required (Click here for information on sensor selection)
Edgetech 137 Aircraft Hygrometer
Edgetech 137-A1 Sensor Assembly, Miniature Probe: Single Stage (45C Depression)
Edgetech 137-A3 Sensor Assembly, Miniature Probe: Three Stage (65C Depression)
Edgetech 137-AS/L Aircraft Sampling System, Left Side from Pilots Perspective
Edgetech 137-AS/R Aircraft Sampling System, Right Side from Pilot's Perspective
EdgeTech HT120 系列濕度變送器
精密變送器用于快速，準確的濕度，氣壓，溫度，絕對壓力和露點測量
HT120 series is a precision transmitter that provides quick and accurate humidity, barometric pressure, temperature, absolute pressure and dew point measurements over a wide temperature range of -40°C to 120°C. The stainless steel probe is easily adaptable for most applications and the optional display module (DIS) is a feature that not only monitors but controls the application process.
Probe only: three 0-10Vdc output and RS232 output
18 to 30Vdc power
Programmable scaling and selectable measurement parameters (wet bulb, ppmv, gr/lbs, dry bulb, etc.)
Optional Display (DIS option): 2 line LCD backlit display, three 4-20mA outputs, 2 programmable alarm relays housed in an IP65 enclosure
Accuracy ±1% nominal
Pressure rated to 700psia
Rated to 120°C temperature
?"NPT adjusting stainless steel pipe fitting
Field replaceable sensor maintaining published accuracy
EdgeTech HT60 系列濕度/溫度/露點/壓力變送器
濕度/溫度/露點/壓力變送器
The HT60 Series is a transmitter for humidity, temperature and dew point or barometric pressure applications and offers many other psychometric calculations.
The three measurements in one probe allows the end-user flexibility where space constraints are a concern. The series is configured for wall and duct applications and offers field replaceable sensor tips where interchangeability is within ±1%.
4-20mA (x3) scalable
RS-232 programmable and readable
Alarm, relays (x2) settable by end user
LCD display 2 line backlit (wall mount version only)
±1% RH
±0.5°C Temperature
±3mb Barometric Pressure
±1.0°C Dew Point
Wall & duct mount configurations
Field replaceable sensor tip interchangeability to 1%
EdgeTech 200M DewTrak 氣象濕度系統
非常適合安裝需要濕度連續，自動，無人值守計量
The Model 200M is a complete instrument for the measurement of Atmospheric Dew Point, Ambient Temperature, % Relative Humidity, or other Psychrometric Variables. It employs the very reliable optical chilled mirror sensing technique which provides a primary measurement of dew point, and is traceable to NIST. The Model 200M is ideally suited for installations requiring continuous, automatic, and unattended measurement of humidity over a very wide range.
Primary measurement technique
High accuracy and reliability
Certificate of Traceability to NIST provided
Sensing scheme discriminates between dew and contamination
Reduces maintenance requirements
No drift, no hysteresis
Fast response
No sensor calibration required
Self-diagnostics and continuous unattended operation. No balancing or other adjustments required
Chilled mirror sensor selection required
EdgeTech Com.Air 露點監視器
連續和幾乎免維護露點監測
The Com.Air dew point monitor has been designed by EdgeTech to offer the highest level of reliability and accuracy available in compressed air system dew point measurement.
Backed by more than 35 years experience, this primary measurement technology is fully NIST traceable and utilizes a chilled mirror sensor, the most accurate dew point sensing scheme available, to deliver consistent drift-free measurements without regular calibrations or sensor replacement.
Com.Air is a complete dew point monitoring System. The ruggedized aluminum NEMA-12 enclosure houses the sensor, control circuitry, as well as flow control and is easily wall-mounted to conserve space. Only the sample line and power connection is needed for the system to be operational.
Com.Air also offers a programmable Automatic Balance Control (ABC) cycle which corrects for the light reducing affects of mirror contaminates and allows for continuous monitoring and virtually maintenance-free operation
NIST Traceable
Virtually maintenance free
Easy to install
Self monitoring
User programmable audibleand visual alarms and relay contact
Programmable Automatic Balance Control (ABC)
Widest Available range -103 to 122°F (-75 to 50°C)
Chilled mirror sensor selection required
EdgeTech PPM1 微量水分測定儀
非常適用于比較干凈，干燥，惰性氣體應用
The PPM1 is a trace moisture analyzer designed specifically for monitoring moisture levels in dew point and PPM units. This trace moisture analyzer utilizes an electro-chemical (P205) sensor in combination with a proprietary semi permeable diffusion membrane.
The principle of operation applies the Faraday’s Law of Electrolysis which measures the dissociation current making it a fundamental measurement of the moisture present. The PPM1 is ideally used in relatively clean, dry, inert gas applications.
Sensitivity below 1ppm
Fast response
Long sensor life
Low cost
Fundamental measurement of moisture content
Displays / outputs—dew point (C/F) and PPM values
EdgeTech PPM2便攜式微量水分測定儀
The PPM2 is a portable battery powered trace moisture analyzer designed specifically for monitoring moisture levels in dew point and ppm units. This trace moisture analyzer utilizes an electrochemical (P2O5) sensor in combination with a proprietary semi permeable diffusion membrane.
The principal of operation applies the Faraday's Law of Electrolysis which measures the dissociation current making it a fundamental measurement of the moisture present. The PPM2 is ideally used in relatively clean, dry, inert gas applications.
PPM2-FV Positive Pressure Application, a portable battery powered trace moisture analyzer with a flow valve.
PPM2-VP Atmosphere / Vacuum Application, a portable battery powered trace moisture analyzer with a vacuum pump.
Battery Powered, rechargeable batteries, charger included
Fast Response
Sensitivity below 1ppm
Long sensor life
Fundamental measurement of moisture content
Displays/outputs - dew point (C/F) and PPM values
EdgeTech DPM-99 醫用空氣露點濕度計
滿足醫療方面持續的露點監測和報警要求
The NFPA99 has mandated that for Med Gas systems the "dew point for locally compressed air shall be monitored and alarmed per 4-3.1.9.8 and 4-3.1.1.2(f) to protect from line pressure dew point rise to 39 degrees F (3.9 degrees C) from a nominal design of 35 degrees F (1.7 degrees C)." This safeguard was the foundation for the new EdgeTech DPM-99 Med Gas Dew Point Monitor. This specifically designed monitor exceeds the requirements set forth by the NFPA and was a collaboration with AIRVAC Technical Services who are certified by P.IP.E as medical gas inspectors in all 50 US States.
NFPA99 compliant
Audible and visual alarms
Continous dew point monitoring
Chilled mirror sensor selection required
EdgeTech DPS1 加熱露點系統
加熱露點濕度計測量露點-35°C（-31°F）至95°C（203°F）
EdgeTech EC4 4.5立方英尺 高精度溫/濕度校驗箱
EdgeTech 625 手持式溫濕度計
The Model 625 humidity/temperature hand-held hygrometer can display any of the following: RH and temperature, or dew point and temperature, or wet bulb and temperature. The unit includes the 625 hand held hygrometer, an integral humidity probe head, a handle and cable, a 9V battery, a travel case and a NIST traceable calibration certificate.
The Model 625 is an ideal instrument for indoor air quality (IAQ) and indoor environmental quality (IEQ) measurements of temperature and humidity. The EdgeTech 625 temp/RH probe can be used two ways: use it as an integrated unit by attaching the probe head to the instrument or connect both parts via a cable. The clear back-lit display can be switched between relative humidity, wet bulb, and dew point at the touch of a button.
Displays temperature, relative humidity, wet bulb temperature and dew point
Max - Min values
“Hold” button freezes display readings
Backlit display
Auto Off
Patented humidity sensor
EdgeTech 635-1 手持式濕度溫度計
Accurate Humidity measurements are becoming increasingly important, along with eliminating the hindrance of wires and having the versatility to measure in those areas where cabling is almost impossible. The 635 is the solution for many of those applications.
The Model 635-1 is a robust and reliable measuring instrument with the protection class of IP54. The large back lit display allows the user to easily view the dew point, RH and temperature readings. The 635 offers both standard plug-in probes and optional wireless probes that can measure up to a distance of 20 meters. A maximum of 3 wireless probes can be used at one time and can be retrofitted with the 635 at anytime. All probes are equipped with a patented humidity sensor offering long term reliability and guaranteed accuracy based on results from worldwide laboratory tests. The 635 is equipped with a secured carrying strap for safe transporting and has heavy duty magnets on the back to ensure secure attachment at the measuring location.
Highest precision ±2%RH
Wireless probes can be retro fitted at any time
Backlit display
Protection type: IP54
Connection up to 3 wireless probes
Easy to follow menu
EdgeTech 6740 系列壓縮空氣變送器
The 6740 Series incorporates a ±1% maintenance free humidity probe ideal for checking humidity measurements for validation of critical environments. It's rugged, compact and protected by a waterproof aluminum housing. The accuracy of this probe has been tested and proven time and again in worldwide laboratory tests. The probe is equipped with a patented capacitive polymer %RH sensor.
Humidity monitoring in compressed air
6744 with display
6742 without display
Dew point range from 30 to -60°C
Pressure rated to 700 psia
1/2" NPT for mounting
2 wire loop powered
EdgeTech LC70 系列溫濕度變送器
The LC70 Series is a series of low cost transmitters that measure humidity and temperature in energy management and HVAC applications. These units use a very accurate and reliable resistive sensor for humidity and a precision integrated-circuit temperature sensor for monitoring temperature. The LC70 series offers a cost effective yet durable humidity and temperature solution with easy integration to a display, PLC or control system.
Low cost transmitters
4-20mA loop powered
Accuracy:±3% RH，±0.5°C Temperature
12-32Vdc power
Commercial/industrial configurations
EdgeTech OxyMaster 16TDP 氧氣和露點分析儀
This model was made for fast, accurate and economic measurement of Oxygen and Dewpoint at trace levels. A simple menu-driven software, touchpad and large LCD-display allow easy and fast start-up of the instrument. The unit measures Humidity between -0.1 and 1000 ppm and Oxygen between 0 - 10000 ppm.
Oxygen and humidity measurement in one unit
Oxygen measurement range 0-10000 ppm
Humidity measurement -0.1-1000 ppm
4-20mA outputs, RS232 and data logging included
User selectable measurement range
Oxygen sensor - a micro fuel cell,P2O5 trace moisture sensor
Power 85-230Vac, 24Vdc
Clear text graphic display
EdgeTech OxyT-RA 兩線制氧氣變送器
4-20 mA Loop Powered Two Wire Oxygen Transmitter
The Model OxyTrans is an easy to use, accurate and economical way to measure Oxygen at trace and % levels. A simple display and one point calibration allows for a quick start of the instrument.
Measuring Range
The unit will offer ranges between 0-100ppm, 0-1,000ppm, 0-10,000ppm of oxygen. 0-1% to 0-25% O2.
Sensor
The OxyTrans uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life.
Calibration
The calibration of the instrument for trace oxygen measurements in gas should be done with a known calibrated gas. The concentration can be chosen freely within the measuring range.
Flow-Through Measuring Cell in Stainless Steel
The measuring cell is modular and made of stainless steel. A defective measuring cell can be repaired by replacing the defective part only, rather than the complete unit.
A 2 wire in-line oxygen transmitter
4-20mA output
Display: 6 digit alphanumeric with bar graph
5 ranges offered: 0-100ppm, 0-1000ppm, 0-10000ppm, 0-1%, 0-25%
Oxygen sensor: a micro fuel cell
Easy, accessible potentiometer for one point field calibrations
OxyTrans-PSS 便攜式氧氣變送器
The Model OxyTrans-PSS is a portable oxygen transmitter that is fast responding, accurate and is capable of measuring oxygen at trace or percent levels. The OxyTrans-PSS has the capability of measuring oxygen between 0 - 10,000 ppm or 0-25 % and offers ease of operation with a large readable LCD display and a durable aluminum case that protects the measuring equipment during transport.
4-20 mA Loop Powered Two Wire Oxygen Transmitter
The OxyTrans-PSS uses a special micro-fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and has a long operating life.
The calibration of the instrument for trace oxygen measurements in gas should be done with a known calibrated gas. The concentration can be chosen freely within the measuring range.
The measuring cell is modular and made of stainless steel. A defective measuring cell can be repaired by replacing the defective part only, rather than the complete unit.
Portable oxygen transmitter
Oxygen ranges selectable within 0-10,000ppm and 0-25%
Power 85-230Vac, Optional: battery powered
Uses a micro-fuel sensor
In-line filter
Durable aluminum case
OxyTrans-SS氧氣采樣系統
4-20 mA Loop Powered Two Wire Oxygen Transmitter
The Model OxyTrans is an easy to use, accurate and economical way to measure Oxygen at trace and % levels. A simple display and one point calibration allows for a quick start of the instrument.
The unit will offer ranges between 0-100ppm, 0-1,000ppm, 0-10,000ppm of oxygen. 0-1% to 0-25% O2.
The OxyTrans uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life.
The calibration of the instrument for trace oxygen measurements in gas should be done with a known calibrated gas. The concentration can be chosen freely within the measuring range.
Flow-Through Measuring Cell in Stainless Steel
The measuring cell is modular and made of stainless steel. A defective measuring cell can be repaired by replacing the defective part only, rather than the complete unit.
Integrated oxygen sampling system
Right angle display O2 transmitter
Panel size 15in (38.1cm) square
Many measuring ranges available
Options: pump and AC/DC power supply
OxyTrans-EX 防爆氧氣變送器
The Model OxyTrans is an easy to use, accurate and economical way to measure Oxygen at trace and % levels. A simple display and one point calibration allows for a quick start of the instrument.
The unit will offer ranges between 0-100ppm, 0-1,000ppm, 0-10,000ppm of oxygen. 0-1% to 0-25% O2.
The OxyTrans uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life.
The calibration of the instrument for trace oxygen measurements in gas should be done with a known calibrated gas. The concentration can be chosen freely within the measuring range.
The measuring cell is modular and made of stainless steel. A defective measuring cell can be repaired by replacing the defective part only, rather than the complete unit.
A 2 wire explosion-proof in-line oxygen transmitter
II 1/2 G Ex ia IIC T4 (ATEX approved)
4-20mA output
Display: 6 digit alphanumeric with bar graph
5 ranges offered: 0-100 ppm, 0-1,000 ppm, 0-10,000 ppm, 0-1%, 0-25%
Oxygen sensor: a micro fuel cell
Easy, accessible potentiometer
ELH Series 精密濕度檢驗箱
The EdgeTech ELH Series is a series of precision humidity chambers, with NIST traceable accuracies in humidity (±0.5% typical), temperature (±0.1°C) and dew point (±0.2°C). The ELH Series consist of a programmable controller for constant precision control and uniformity, and an integrated DewMaster chilled mirror hygrometer for accurate temperature and humidity measurements.
The ELH series offers three standard chamber sizes: 1.5cu.ft., 6cu.ft. and 10cu.ft. Larger volume chambers are also available.
All chambers use an environmentally safe non-depleting refrigerant.
Precise chamber controls
Hygrometer utilizes primary measurement techniques
Historically proven and unsurpassed humidity control system
Sensing system discriminates between dew and contaminants
Programmable controller for automatic ramping, soaking and alarming
Stainless steel interior
Fully adjustable shelf
Demineralizing cartridge system
2 inch access port
Drain: hard piped
DewGen 高精度露點發生器
The EdgeTech DewGen is a divided flow dew point generator that can generate dew points from +15°C to frost points of -80°C. The source gas is typically dry nitrogen and can be used as a stand-alone or used with an EdgeTech DewMaster with an S3 chilled mirror dew point sensor resulting in a very accurate, NIST traceable calibration system.
The DewGen can go wherever needed, in the laboratory or in the field.
Creates a known dew/frost point over a wide range
NIST traceable when used with EdgeTech DewMaster
High accuracy and repeatablity
Constant regulated dew point output
No electric power required - can go anywhere
Ideal for portable applications
Inherently explosion proof
Alicat 氣體質量流量計
Aalborg 熱式氣體質量流量計
Accurate Thermal Systems LLC
AW Gear Meters
Agilent 氦檢漏儀和分子泵
APG 壓力和液位儀表
AMETEK 壓力溫度校準
Bronkhorst 氣/液質量流量計
Badger Meter
Barksdale 控制產品
Condec 壓力校準
Danfoss 溫度壓力傳感器和閥
GE Druke
Dynaflox 超聲波流量計
Dynasonics 超聲波流量計
ECOM America 煙氣分析儀
EESIFLO 超聲波流量計和油中水監測儀
Emerson Rosemount 儀器儀表
FLOMEC 流量計
Fluke 校準設備
Fox Thermal 熱式氣體質量流量計
Greyline 超聲波流量/液位計
Isotech 溫度校準設備
Kaye Instruments
Keller 壓力測量
Leyro Instruments
Mensor 壓力控制儀
Martel 校準儀
MesaLabs
Meriam 壓力計
ITT Neo-Dyn 壓力溫度開關
NoShok 壓力測量
GE Panametrics
Palmer Wahl 壓力溫度測量校準
PIE Instruments 校準儀
英國Planer 程序冷凍儀
Ralston 壓力儀表
Setra 壓力測量
Sensing Precision 壓力流量測量
SIKA 溫度校準和流量測量
Truflo 流量計
Teledyne 真空計和質量流量計
Vitrek電氣安全測試儀
Weed 溫度變送器
Wohler 工業視頻內窺鏡和管道清潔系統
Shibin
AceGlass 實驗室反應裝置
Across international
AccuTemp真空烘箱
Adolf Wolf SANOclav 高壓滅菌器
Analytical Industries Inc氧氣分析儀
Analox 氣體檢測
Alpha Omega Instruments 氧氣分析儀
ATAGO 折光儀
Bacharach 檢漏儀
BELLCO GLASS 實驗室玻璃器皿和設備
BINDER 實驗室箱體
Carbolite Gero 馬弗爐
Det-Tronics 氣體檢測和火焰探測
E Instruments 氣體檢測
Fresenius 氣體分析儀
Heidolph實驗設備
HF Scientific 水質儀器
H2scan
HACH哈希 水質分析儀器
IMR Environmental Equipment
Michell 露點濕度計
Mahr 測量工具和儀器
Net Safety 在線氣體檢測
Nova Analytical Systems 氣體分析儀
OLEBVAP
Organomation 氮吹儀
Parker Hannifin 氣體發生器
PolyScience冷水機
PureAire 氣體檢測
Rayonet 光致反應設備
Reichert 折光儀
ShelLab 培養箱
Siemens西門子 過程儀表和分析儀器
SI Analytics 分析儀器
Spectrex火焰探測器
ThermoFisher分析儀器
VIASENSOR 氣體分析儀
二手儀器
AccuTrak 超聲波檢漏儀
AdashAmerica測振儀
Airy Technology粒子計數器
Chatillon 推拉力計
Dynamic Solutions
EdgeTech 冷鏡露點儀
EDC 環境顆粒物監測
ERBESSD INSTRUMENTS
Enerac 氣體分析儀
Fisher Labs
Gardco 測試設備
GfG 氣體檢測
Extech 視頻內窺鏡
Hawkeye
Metrix 振動監測
Monarch 頻閃儀/轉速表
MARK-10 推拉力和扭矩測量
MBW Calibration
Megabras 微歐計/絕緣測試儀
OUTLAND 水下視頻設備
PhyMetrix 露點儀濕度計
PTC Instruments 硬度計
RKI 氣體檢測儀器
Rotronic羅卓尼克
SE International 輻射檢測儀
Transducer稱重傳感器
Tramex水分儀
UE Systems 超聲波檢測儀
AEMC 電力儀器
Associated Research 高壓絕緣測試儀
B＆K Precision 可編程電源
Dranetz 電能質量分析儀
DV Power 斷路器分析儀
ETI 斷路器測試儀
FW Bell 高斯計
Hipotronics 耐壓測試儀
意大利HT Instruments
IET Labs 電阻測試
Infratek 功率分析儀
Megger 電力儀器
PowerSight 電能質量分析儀
Seaward 電氣安全測試儀
Trico
德國W-IE-NE-R 德國iseg 機箱和多通道電源
Wilcom 光纖儀器
Accu-Seal 封口機
Aries FilterWorks 過濾系統
Cat Pumps 泵
Conax 溫度傳感器和連接器
Engineered?Prod Equipment
Flo-tech 液壓測試儀
Graco固瑞克 噴涂機
GSSI 混凝土結構透視儀
Hass Manufacturing Company 閥門
Haskel 增壓泵
Hydraulics International增壓泵
Ismatec 泵
瑞士JCEM 打褶機
Jewell 傾角儀和加速度計
Jaesung Engineering 旋涂機/蝕刻機
KEYSTONE閥門和執行器
LEESON 電機
Lero雷諾 液壓測試儀
Lynair氣缸
Meggitt 振動傳感器
英國Mucon 閥門
OhmniLabs 可編程機器人
PackRite 封口機
TRIVACO 閥門
?Tippmann蒂普曼 模切機
Ultraflo 蝶閥和執行器
US Stoneware 研磨機
德國VMA高速分散機
Vacuum Research Corp真空計/閥/泵
VRC閥門定位器
